Mold Odor Removal – Treatment

Ozone shock treatment kills mold and removes mold odor.

img-mold.jpgRunning the Odorfree ozone generator for several hours will kill mold and mildew and remove mold smells.

Shock treatment remediation is required to remove mold odor because mold and mildew thrive in damp environments and those areas with poor air circulation. If the area smells musty, there's a good chance that live mold spores are in the air. These spores can reproduce by the millions creating health issues, as well as damaging the building and its contents.

O3 is very effective in attacking mold, mildew and mold spores. At high levels, O3 deteriorates the cell structure of these microorganisms and breaks down their ability to reproduce. As the OdorFree fills the entire space with ozone, every interior surface including floors, ceilings, closets, furniture and clothing gets sanitized. While ozone is not able to pass through solid walls, it goes where normal air can go, even down into cracks and crevices.

+How to Treat Mold Odors+

Solution: To remove musty smells, close off the area to be treated, place an OdorFree unit in the space, set the timer and vacate the area.The treatment time depends on the size of the space and how deeply entrenched the mold and odors. It can take several hours or longer to remove heavy mold smells and kill mold and mildew. After treatment allow the O3 to dissipate for at least an hour prior to re-occupying space. In the event that the source of the moisture has not been completely eliminated, treatment may need to be repeated periodically to prevent return.

Note: The fan on the thermostat for the air conditioner may be turned to the ON setting to circulate the O3, kill mold and remove mold smell that has built up inside the ductwork. For long term treatment it is recommended that one window be kept open about 2 inches to provide a constant source of oxygen to the unit for ozone creation.

Compare Models
Autel 1000
Autel 1000 Logo $299.00
Up to 1,000 Sq Ft Order Now
OdorFree Autel 1000
Up to 1,000 Sq Ft
$299.00
Order Now

For Autos, Hotels, and Small Spaces
with Short Treatment Times

Built-in 1 to 60-Minute Timer|Continuous Hold Setting
Up to 1,000 Square Feet|Adjustable Ozone Output

The Autel 1000 is able to eliminate mold odors in spaces up to 1,000 square feet, however, this unit only has a 60-Minute Timer. Most spaces will require longer treatment times, so an OdorFree model with a 12-Hour Timer is more convenient. This model has a variable ozone output control and a 60-Minute Timer that automatically turns the machine off when the sanitizing is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 60 minutes until the machine is turned off manually. Complete with plates and filter for long-term use.

Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, mold can migrate through the ductwork and the entire facility may need to be treated at one time.

Suite 1500
Suite 1500 Logo $329.00
Up to 1,500 Sq Ft Order Now
OdorFree Suite 1500
Up to 1,500 Sq Ft
$329.00
Order Now

Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 1,500 Square Feet|Adjustable Ozone Output

The Suite 1500 will eliminate mold odors in spaces up to 1,500 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the sanitizing is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Suite 1500 can also be used for rapid odor removal in smaller spaces. Complete with plates and filter for long-term use.

Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, mold can migrate through the ductwork and the entire facility may need to be treated at one time.

Villa 3000
Villa 3000 Logo $379.00
Up to 3,000 Sq Ft Order Now
OdorFree Villa 3000
Up to 3,000 Sq Ft
$379.00
Order Now

Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 3,000 Square Feet|Adjustable Ozone Output

The Villa 3000 will eliminate mold odors in spaces up to 3,000 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the sanitizing is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Villa 3000 can also be used for rapid odor removal in smaller spaces. Complete with plates and filter for long-term use.

Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, mold can migrate through the ductwork and the entire facility may need to be treated at one time.

Estate 4000
Estate 4000 Logo $429.00
Up to 4,000 Sq Ft Order Now
OdorFree Estate 4000
Up to 4,000 Sq Ft
$429.00
Order Now

Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 4,000 Square Feet|Adjustable Ozone Output

The Estate 4000 will eliminate mold odors in spaces up to 4,000 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the sanitizing is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Estate 4000 is for the largest spaces and toughest odors but can also be used for rapid odor removal in smaller spaces. Complete with easy to clean plates and filter for long-term use.

Note: Mold can migrate through the ductwork and the entire facility may need to be treated at one time.

The Odor Answer Line 1-800-683-9749

Call us for any questions you may have on how to treat particular odors or which model to choose.